Oil Processing Equipment - Flaking Machine
Oil processing equipment - Flaking machine is an automatic embryo rolling machine. It is mainly used for the embryo rolling of vegetable oil, so as to maximize the consistency of embryos, so as to achieve a better oil extraction state of oil seeds.
- Main Technical Parameters
Model |
Capacity(T/24H) |
Thickness of Embryo (mm) |
Power(KW) |
Dimension(cm) |
Weight(T) |
YYPT2 x 40 x 80 |
30-40 |
0.25-0.35 |
(6-11)*2 KW |
-- |
3000 |
YYPY2 x 60 x 80 |
50-60 |
0.25-0.35 |
18.5x2+0.37+1.1 |
180x130x200 |
4000 |
YYPY2 x 60 x 100 |
70-80 |
0.25-0.35 |
22x2+0.37+1.1 |
200x130x200 |
5000 |
YYPYFP2 x 80 x 100 |
120-150 |
0.25-0.35 |
30x2+0.55+1.5 |
225x223x210 |
10000 |
YYPYFP2 x 80 x 125 |
180-200 |
0.25-0.35 |
37x2+0.55+1.5 |
250x223x210 |
13000 |
YYPYFP2 x 80 x 150(D) |
280-300 |
0.25-0.35 |
55x2(90)+0.75x2+2.2 |
276x223x215 |
15000 |
YYPYFP2 x 81 x 220D |
450-500 |
0.25-0.35 |
160+1.1+1.1+3.0 |
358x242x236 |
20000 |
In the past few years, our company's engineering and technical personnel have actively penetrated the front line of the oil industry, humbly listening to users and experts, and taking advanced experience of domestic and foreign equipment. Find out the shortcomings of the old rolling mill. Repeated research, bold ideas, scientific argumentation,after repeated experiments, anti-collision hydraulic rolling mills with different processing capacities were mass-produced. The characteristics are as follows:
- 1.The daily output is large, the work is stable, and the noise is small.
- 2.The pressure of the hydraulic system is stable and reliable, and the gap type hydraulic pump station is adopted.
- 3.The whole machine has a compact structure and is convenient and quick to adjust.
- 4.with advanced anti-collision measures, through the dial on the cylinder, the pitch between the rolls and the required thickness of the blank can be precisely adjusted. Ensure that the pressed piece is qualified evenly.
- 5.Because the roll has a good anti-collision device, and the device is installed in front of the cylinder of the rolling mill, the roll spacing can be easily adjusted by adjusting the hand wheel and the locking hand wheel, and the dial display spacing. If you want to adjust the gap, you can see how much the dial is adjusted. Therefore, the rollers are effectively prevented from colliding and colliding, and the rolls are always operated under the required clearance, which fully ensures that the rolls are not peeled and not dropped, and the number of rolls is not higher than the roll surface, and the number of rolls is increased. The service life of the rolls.
- 6.Roller bearings are all made of famous brand bearings at home and abroad to ensure the quality of the bearings and effectively enhance the service life of the bearings. The entire machine requires almost no overhaul, so users can never use it.
- 7.The tile seat adopts a square structure, and the end cap of the bearing seat is tightly closed, which plays a role of fuel saving and prolonging the service life of the bearing.
- 8.The apex baffle at both ends of the roll is made of metal material. When adjusting, it can be adjusted freely up, down, left, right and front and rear. It is convenient and quick to increase the service life of the sloping baffle and ensure no leakage. .
- 9.The feeding roller is closer to the roll, which changes the phenomenon that the traditional rolling mill dips outside.
- 10.The magnetic separation device uses a powerful magnet with strong magnetic force to ensure that no iron is entered between the rolls.
- 11.The roller of this machine adopts the high-quality centrifugal casting roll produced by “China One Heavy”. The alloy layer is 30-35, the thickness of the roll is increased, the through-axis assembly process, the hardness of the roll is HS75o±2, the roll strength is greatly improved, and the roll is changed. The traditional assembly process makes the rolls never deform and the blanks are evenly qualified.
- 12.The scraper design elastic scraper is compressed by the spring on the scraper holder. The nut of the compression spring is used to adjust the scraping degree of the spring in the scraper and the roll, and when adjusting, the person can be easily adjusted only outside.
- 13.the bearing is easy to disassemble, and the installation is fast.