• Home
  • Buy disk sheller for cottonseed: checks for capacity and line fit

Nov . 16, 2026 00:05 Back to list

Buy disk sheller for cottonseed: checks for capacity and line fit

Summary

To buy disk sheller equipment for cottonseed, match the seed mix, daily throughput, disc adjustment, drive, and installation envelope. Our cottonseed disk sheller handles 100~170t/d, uses a 45kw drive, and works with cottonseed, peanuts, soybeans, and embryo cake. Its 2600kg weight and 200×1620×1980mm dimensions should be included in your plant layout before ordering.

Chuck diameter: φ1315mmDisc diameter: φ1300mmThroughput: 100~170t/dSpindle speed: 840~880r/min
Buy disk sheller for cottonseed: checks for capacity and line fit
Illustration for reference; see the product page for actual photos and specifications.

A purchase decision starts with the material and line around the sheller. Our cottonseed disk sheller is mainly used for cottonseed shelling and can also break peanuts, soybeans, and embryo cake. Its tooth-jaw kneading action breaks the oilseed skin between a fixed disc and a rotating disc.

To buy disk sheller equipment responsibly, compare the seed mix, target flow, power arrangement, adjustment method, and installation space. These checks identify the plants that suit this machine.

Match the sheller to your seed mix

Cottonseed is the primary application. Peanuts, soybeans, and embryo cake are also suitable materials for the same shelling principle. Choose this cottonseed disk sheller when cottonseed is central to your process and you need one machine that can handle these additional oilseed materials.

Material changes affect the working gap. A regulator adjusts the distance between the fixed and movable discs, while a plate adjustment controls the amount entering the shelling area. Give us the seed types and intended sequence when you prepare the purchase specification, so the adjustment points can be considered with the rest of the line.

Feed control also matters. Material enters through the feed hopper and feeder, then moves along the feeding roller toward the grinding area. This layout suits a plant designed for a controlled continuous feed stream.

Compare throughput and power with the rest of the line

The machine has a throughput of 100~170t/d and a spindle speed of 840~880r/min. Use these values to compare the sheller with the feeder, conveyors, storage, and downstream separation equipment. A line should be planned around a compatible flow at each stage.

ParameterValue
Chuck diameterφ1315mm
Disc diameterφ1300mm
Throughput100~170t/d
Spindle speed840~880r/min
Power4level 45kw
Weight2600kg
Dimension200×1620×1980mm

The power requirement is 4level 45kw. Include it in the electrical and equipment layout review. The 2600kg weight affects the foundation, lifting method, and route into the building. Confirm the planned operating point with us using your actual seed mix and daily target.

What to weigh

Seed mix · cottonseed, peanuts, soybeans, or embryo cake
Line fit · 100~170t/d throughput and 4level 45kw power
Adjustment · regulator controls fixed and movable disc spacing
Installation · 2600kg weight and 200×1620×1980mm dimensions

Check the disc arrangement and controls

The discs are made of white cast iron. Their grinding tooth pattern uses fine diagonal stripes. Ten fan-shaped plates form one annular disc, and the annular disc is balanced during installation.

One disc is attached to the stationary housing and does not turn. The other is mounted on the shaft and rotates. A regulator at the shaft end changes the distance between the discs. The rotating disc has eight unclamping points, four inside and four outside, which throw the oilseed into the shelling space as it turns.

This configuration suits a line where operators need a defined mechanical point for changing the disc spacing. Include access to the regulator, feeder, and disc housing in the service layout.

Hard impurities need upstream attention. If metal or stone enters the grinding area, the spring action expands the disc spacing and helps prevent damage to the equipment. Keep cleaning and impurity removal in the line design instead of relying on this mechanism as the only control.

Confirm the installation envelope

The machine dimensions are 200×1620×1980mm. Check door openings, turning space, lifting access, feed position, and discharge direction before placing the order. The 2600kg weight should be included in floor and handling planning.

The φ1300mm disc diameter and φ1315mm chuck diameter also affect the working envelope. Leave access around the regulator, feeder, and disc housing for adjustment and service. The equipment includes a feed hopper, feeder, roller, gear, pulley, fixed disc, movable disc, shaft, regulator, and spring arrangement. Map these points against the incoming and outgoing equipment.

Your shortlist

Cottonseed disk sheller · cottonseed plants with multi-oilseed processing needs

Set the purchase boundary

Choose our cottonseed disk sheller when your plant centers on cottonseed, needs 100~170t/d throughput, and benefits from adjustable spacing for peanuts, soybeans, or embryo cake. The fit depends on matching the 4level 45kw power arrangement, the 2600kg handling requirement, and the 200×1620×1980mm installation envelope to your site. Send your seed mix, daily target, and layout dimensions with your quotation request.

The company

Hebei Huipin Machinery Co.,LTD

We are a large-scale grain and oil equipment enterprise specializing in scientific research, design, production, sales and engineering installation. After more than 40 years of development, the company now has a first-class grease equipment production base, professional grease technical engineers and experts, as well as advanced production technology and precision equipment. All grease equipment and accessories are produced independently.…

About Us ↗Visit company website ↗
Share

You have selected 0 products