Capacity and process role

The Popular Commercial machine is a pre-press oil expeller with a capacity of 45 to 50 tons/24hr when sunflower kernel or rapeseed is used as the example. Its operating description places it in pre-pressing, solvent extraction preparation, or a second-press process. The same description identifies rapeseed, peanut, sunflower seed, and persimmon seed as example oilseeds.

HP290 has separate input figures for pressing and pre-pressing. Its listed general figures are 80 to 100 tons per day for pressing and 180 to 240 tons per day for pre-pressing. Its seed-specific table gives different ranges for maize germ, rapeseed, cottonseed, peanut kernel, oil sunflower, and castor-oil plant. For example, the table lists 180 to 200 tons per day for rapeseed pre-pressing and 200 to 230 tons per day for peanut pre-pressing.

These figures suit different planning questions. A buyer sizing a smaller pre-press section around the 45 to 50 ton/24hr reference should examine the Popular Commercial machine. A buyer comparing a higher-throughput pre-press or pressing section should evaluate HP290 against the intended seed and process mode, instead of using its general pressing and pre-press figures as one capacity value.

Footprint and installed mass

The Popular Commercial machine has overall dimensions of 2,900 × 1,850 × 3,640 mm and a net weight of 5,500 kg. HP290 measures 5,100 × 2,150 × 3,930 mm and has a net weight of 14,500 kg.

The difference affects factory planning. Picture moving the Popular Commercial machine into a work area with a planned footprint of about 2.9 m by 1.85 m, while allowing for its 3.64 m height. HP290 requires a longer and wider equipment position, with a listed footprint of 5.1 m by 2.15 m and a height of 3.93 m. Before ordering, measure the installation bay, access route, and lifting arrangement against the selected machine's dimensions and mass.

Drive and operating parameters

The Popular Commercial machine lists a Y225M-6 motor at 1,000 rpm, with 30 kW power and a 220/380 V, 50 Hz electrical specification.

HP290 lists two main-motor options, 160 kW or 132 kW, plus reducer motors of 7.5 or 11 kW, 3.0 kW, and 2.2 kW. Its pressing shaft speed is 28 to 51 rpm and its feed shaft speed is 85 rpm. The machine also lists a steam pressure of 3 to 4 kg/cm³ and a steaming and frying temperature of 60 to 110°C.

The figures indicate different installation checks. The Popular Commercial machine requires a review of the stated voltage, frequency, and 30 kW motor arrangement. HP290 requires the buyer to select the applicable main-motor option and plan for the listed reducer motors, steam conditions, and shaft speeds. Send the intended seed, process mode, electrical supply, and steam conditions to Hebei Huipin Machinery Co.,LTD when requesting a configuration review.

Which oil expeller fits your plan?

Choose the Popular Commercial Oilseed Crushing Machinery Oil Expeller Press Machine when the planned line matches its 45 to 50 ton/24hr sunflower-kernel or rapeseed reference and its pre-press role. Its listed dimensions and 5,500 kg net weight also define a smaller installation envelope than HP290.

Choose HP290 when your line requires its higher listed input ranges, seed-specific pre-press or pressing figures, and the larger machine footprint. Its 14,500 kg net weight and multiple motor options make plant layout, power selection, and steam planning part of the purchase decision.

For a quotation, send the supplier your seed type, target process mode, daily input, available electrical supply, steam conditions, installation-bay dimensions, and lifting limits.